400mm (16″) Inox Chop Saw Cut-Off Disc – 5 Pack

Pack of 5 — $51.25
($10.25 each)

400mm chop saw cut-off discs for cutting larger steel sections, pipe, tube, angle and channel on a compatible stationary saw.

  • Diameter: 400 mm
  • Bore Size: 25.4 mm
  • Pack quantity: 5 per pack
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeChop Saw Cut-Off Disc
Diameter400 mm
Abrasive / GradeAluminium Oxide (A30)
Bore Size25.4 mm
Machine CompatibilityCompatible chop saw / cut-off saw of matching size
Maximum RPMCheck maximum RPM marked on the disc before use
ApplicationStationary cut-off cutting
Safety StandardEN 12413 where applicable
Country of ManufactureIndia

400mm Inox Chop Saw Cut-Off Disc

X Flex 400mm Inox Chop Saw Cut-Off Disc — pack of 5.

400mm chop saw cut-off discs for cutting larger steel sections, pipe, tube, angle and channel on a compatible stationary saw.

Applications

  • Cutting larger steel sections.
  • Cutting pipe, tube, angle and channel.
  • Industrial fabrication and maintenance cut-off work.

Size and Compatibility

  • Diameter: 400 mm
  • Bore Size: 25.4 mm
  • Compatible machine: Stationary chop saw/cut-off saw accepting 400 mm discs.
  • Pack quantity: 5 per pack

Check the product label and machine instructions for fitting, operating speed and safe use before starting work.

Browse the X Flex abrasive range for other sizes and workshop consumables.

Size

400mm

Reviews

There are no reviews yet.

Be the first to review “400mm (16″) Inox Chop Saw Cut-Off Disc – 5 Pack”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

SectionDetails
Ideal ApplicationsCutting larger steel sections.
Cutting pipe, tube, angle and channel.
Industrial fabrication and maintenance cut-off work.
Suitable MaterialsMild steel.
Carbon steel.
General ferrous metal.
Recommended MachineStationary chop saw/cut-off saw accepting 400 mm discs.
Best ForLarger stationary saws in fabrication and industrial workshops.
Do Not Use ForHandheld use.
Side pressure.
Cutting unsupported or loose material.
Practical Workshop NoteCheck wheel condition and machine guards before every use.

Chop saw discs are designed for straight cutting on stationary cut-off saws. Correct clamping of the workpiece and controlled downward pressure are essential for safe cutting.

Intended UseStraight cutting of steel sections, pipe, angle, channel, RHS, SHS and solid bar where the disc is suitable for the material.
Compatible MachineStationary chop saw/cut-off saw matching disc diameter, bore and speed marking.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForFreehand cutting, side grinding, use on portable angle grinders, cutting unsecured material, or use above marked speed.

• Clamp the workpiece securely.
• Allow the saw to reach full speed before entering the cut.
• Use steady pressure and avoid forcing the disc.
• Keep hands clear of the cutting path.
• Allow the disc to stop before lifting or handling cut material.

• Cutting loose or unsupported material.
• Pushing too hard and overheating the disc.
• Twisting the disc in the cut.
• Using damaged discs.
• Standing in line with the disc during start-up.

More from Chop Saw Cut-Off Discs

  • Chop Saw Cut-Off Discs

    350mm (14″) Inox Chop Saw Cut-Off Disc – 5 Pack

    Pack of 5 — $42.25
    ($8.45 each)
    Add to cart
  • Chop Saw Cut-Off Discs

    300mm (12″) Inox Chop Saw Cut-Off Disc – 5 Pack

    Pack of 5 — $38.25
    ($7.65 each)
    Add to cart

Frequently Asked Questions

What is this chop saw cut-off disc used for?

400mm chop saw cut-off discs for cutting larger steel sections, pipe, tube, angle and channel on a compatible stationary saw.

Which machine and fitting should I check?

Stationary chop saw/cut-off saw accepting 400 mm discs.. Match the product dimensions and fitting to your tool. Check the product label and machine instructions for the permitted operating speed and setup.

How many are supplied in a pack?

Pack of 5.

Shopping Cart