75mm Twist Knot Cup Wire Brush Wheel – Steel

$11.25

Steel-wire cup brush for removing rust, paint and weld scale from mild steel and carbon steel.

  • Diameter: 75 mm
  • Wire Material: Steel wire
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeTwist Knot Cup Wire Brush
Diameter75 mm
Wire MaterialSteel wire
Thread / BoreVerify packaging
Compatible MachineAngle grinder or compatible machine as specified on label
ApplicationAggressive cleaning, rust and weld scale removal
Country of ManufactureVerify packaging

75mm Twist Knot Cup Wire Brush Wheel – Steel

X Flex 75mm Twist Knot Cup Wire Brush Wheel – Steel.

Steel-wire cup brush for removing rust, paint and weld scale from mild steel and carbon steel.

Applications

  • Removing rust, paint and scale.
  • Cleaning weld areas.
  • Removing weld spatter.
  • Preparing steel before coating or welding.

Size and Compatibility

  • Diameter: 75 mm
  • Wire Material: Steel wire
  • Compatible machine: Angle grinder or compatible machine as specified on label

Check the product label and machine instructions for fitting, operating speed and safe use before starting work.

Browse the X Flex abrasive range for other sizes and workshop consumables.

size

Cup wire Brush (Steel), Cup wire Brush (Stainless Steel), Bevel Wire Brush (Steel)

Reviews

There are no reviews yet.

Be the first to review “75mm Twist Knot Cup Wire Brush Wheel – Steel”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

SectionDetails
Ideal ApplicationsRemoving rust, paint and scale.
Cleaning weld areas.
Removing weld spatter.
Preparing steel before coating or welding.
Suitable MaterialsMild steel.
Carbon steel.
General ferrous metal.
Recommended MachineCompatible angle grinder or tool as specified by brush thread and rating.
Best ForFast surface cleaning where material removal should be limited compared with grinding.
Do Not Use ForStainless steel where carbon steel wire contamination is a concern.
Soft materials that may be damaged.
Using above the rated speed.
Practical Workshop NoteWire brushes throw wires during use. Wear face, eye, hand and body protection.

Wire brush wheels are designed for surface cleaning, rust removal, paint removal, scale removalvand weld spatter cleaning. Wire brushes can shed wires during use, so guarding and PPE are critical.

Intended UseRemoving rust, paint, mill scale, weld spatter and surface contamination from suitable metal surfaces.
Compatible MachineAngle grinder or suitable power tool matching brush size, thread/bore and speed rating.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForCutting, grinding heavy material, use without PPE, use above marked RPM, or use when wires are badly worn, bent or broken.

• Wear eye and face protection at all times.
• Stand clear of the brush plane during start-up.
• Use light to moderate pressure; let the wire tips do the work.
• Avoid snagging on sharp edges.
• Replace brushes with damaged hubs or excessive wire loss.

• Pressing too hard and bending wires.
• Using without a face shield.
• Removing guards.
• Using a brush with loose or broken wires.
• Using the wrong brush type for stainless steel and risking contamination

More from Wire Brush Wheels

Frequently Asked Questions

What is this twist knot cup wire brush used for?

Steel-wire cup brush for removing rust, paint and weld scale from mild steel and carbon steel.

Which machine and fitting should I check?

Angle grinder or compatible machine as specified on label. Match the product dimensions and fitting to your tool. Check the product label and machine instructions for the permitted operating speed and setup.

What should I check before fitting this product?

Check the product dimensions, mounting or shank size and speed rating against your machine. Use only for the intended application and follow the product label.

Shopping Cart