300mm (12″) Inox Chop Saw Cut-Off Disc – 5 Pack

Pack of 5 — $38.25
($7.65 each)

300mm chop saw cut-off discs for cutting steel pipe, tube, angle and flat bar on a compatible stationary saw.

  • Diameter: 300 mm
  • Bore Size: 25.4 mm
  • Pack quantity: 5 per pack
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeChop Saw Cut-Off Disc
Diameter300 mm
Abrasive / GradeAluminium Oxide (A30)
Bore Size25.4 mm
Machine CompatibilityCompatible chop saw / cut-off saw of matching size
Maximum RPMCheck maximum RPM marked on the disc before use
ApplicationStationary cut-off cutting
Safety StandardEN 12413 where applicable
Country of ManufactureIndia

300mm Inox Chop Saw Cut-Off Disc

X Flex 300mm Inox Chop Saw Cut-Off Disc — pack of 5.

300mm chop saw cut-off discs for cutting steel pipe, tube, angle and flat bar on a compatible stationary saw.

Applications

  • Cutting steel pipe and tube.
  • Cutting angle, flat bar and channel.
  • Workshop cut-off operations.
  • General fabrication preparation.

Size and Compatibility

  • Diameter: 300 mm
  • Bore Size: 25.4 mm
  • Compatible machine: Stationary chop saw/cut-off saw accepting 300 mm discs.
  • Pack quantity: 5 per pack

Check the product label and machine instructions for fitting, operating speed and safe use before starting work.

Browse the X Flex abrasive range for other sizes and workshop consumables.

Size

300mm

Reviews

There are no reviews yet.

Be the first to review “300mm (12″) Inox Chop Saw Cut-Off Disc – 5 Pack”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

SectionDetails
Ideal Applications Cutting steel pipe and tube.
Cutting angle, flat bar and channel.
Workshop cut-off operations.
General fabrication preparation.
Suitable Materials Mild steel.
Carbon steel.
General ferrous sections.
Recommended MachineStationary chop saw/cut-off saw accepting 300 mm discs.
Best ForStraight cut-off work on steel sections using a fixed saw.
Do Not Use For Handheld grinders.
Side pressure or twisting cuts.
Materials not listed by the product label.
Practical Workshop NoteClamp the workpiece securely and allow the saw to cut steadily without forcing.

Chop saw discs are designed for straight cutting on stationary cut-off saws. Correct clamping of the workpiece and controlled downward pressure are essential for safe cutting.

Intended UseStraight cutting of steel sections, pipe, angle, channel, RHS, SHS and solid bar where the disc is suitable for the material.
Compatible MachineStationary chop saw/cut-off saw matching disc diameter, bore and speed marking.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForFreehand cutting, side grinding, use on portable angle grinders, cutting unsecured material, or use above marked speed.

• Clamp the workpiece securely.
• Allow the saw to reach full speed before entering the cut.
• Use steady pressure and avoid forcing the disc.
• Keep hands clear of the cutting path.
• Allow the disc to stop before lifting or handling cut material.

• Cutting loose or unsupported material.
• Pushing too hard and overheating the disc.
• Twisting the disc in the cut.
• Using damaged discs.
• Standing in line with the disc during start-up

More from Chop Saw Cut-Off Discs

  • Chop Saw Cut-Off Discs

    350mm (14″) Inox Chop Saw Cut-Off Disc – 5 Pack

    Pack of 5 — $42.25
    ($8.45 each)
    Add to cart
  • Chop Saw Cut-Off Discs

    400mm (16″) Inox Chop Saw Cut-Off Disc – 5 Pack

    Pack of 5 — $51.25
    ($10.25 each)
    Add to cart

Frequently Asked Questions

What is this chop saw cut-off disc used for?

300mm chop saw cut-off discs for cutting steel pipe, tube, angle and flat bar on a compatible stationary saw.

Which machine and fitting should I check?

Stationary chop saw/cut-off saw accepting 300 mm discs.. Match the product dimensions and fitting to your tool. Check the product label and machine instructions for the permitted operating speed and setup.

How many are supplied in a pack?

Pack of 5.

Shopping Cart