115mm Twist Knot Bevel Wire Brush Wheel – Steel

$13.15

Steel-wire bevel brush for cleaning weld seams, edges, corners and irregular steel surfaces.

  • Diameter: 115 mm
  • Wire Material: Steel wire
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeTwist Knot Bevel Wire Brush
Diameter115 mm
Wire MaterialSteel wire
Thread / BoreVerify packaging
Compatible MachineAngle grinder or compatible machine as specified on label
ApplicationEdge, weld and surface cleaning
Country of ManufactureVerify packaging

115mm Twist Knot Bevel Wire Brush Wheel – Steel

X Flex 115mm Twist Knot Bevel Wire Brush Wheel – Steel.

Steel-wire bevel brush for cleaning weld seams, edges, corners and irregular steel surfaces.

Applications

  • Cleaning weld seams.
  • Removing rust and paint around edges.
  • Cleaning corners and irregular surfaces.
  • Preparing steel before repair or coating.

Size and Compatibility

  • Diameter: 115 mm
  • Wire Material: Steel wire
  • Compatible machine: Angle grinder or compatible machine as specified on label

Check the product label and machine instructions for fitting, operating speed and safe use before starting work.

Browse the X Flex abrasive range for other sizes and workshop consumables.

Reviews

There are no reviews yet.

Be the first to review “115mm Twist Knot Bevel Wire Brush Wheel – Steel”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

SectionDetails
Ideal ApplicationsCleaning weld seams.
Removing rust and paint around edges.
Cleaning corners and irregular surfaces.
Preparing steel before repair or coating.
Suitable MaterialsMild steel.
Carbon steel.
General ferrous metal.
Recommended MachineCompatible angle grinder as specified by brush bore/thread and speed rating.
Best ForCleaning areas where a cup brush cannot reach easily.
Do Not Use ForStainless steel where contamination matters.
Using above rated speed.
Applying excessive pressure that bends wires unnecessarily.
Practical Workshop NoteLet the wire tips do the work. Heavy pressure can reduce brush life and control.

Wire brush wheels are designed for surface cleaning, rust removal, paint removal, scale removal and weld spatter cleaning. Wire brushes can shed wires during use, so guarding and PPE are critical.

Intended UseRemoving rust, paint, mill scale, weld spatter and surface contamination from suitable metal surfaces.
Compatible MachineAngle grinder or suitable power tool matching brush size, thread/bore and speed rating.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForCutting, grinding heavy material, use without PPE, use above marked RPM, or use when wires are badly worn, bent or broken.

• Wear eye and face protection at all times.
• Stand clear of the brush plane during start-up.
• Use light to moderate pressure; let the wire tips do the work.
• Avoid snagging on sharp edges.
• Replace brushes with damaged hubs or excessive wire loss.

• Pressing too hard and bending wires.
• Using without a face shield.
• Removing guards.
• Using a brush with loose or broken wires.
• Using the wrong brush type for stainless steel and risking contamination.

More from Wire Brush Wheels

Frequently Asked Questions

What is this twist knot bevel wire brush used for?

Steel-wire bevel brush for cleaning weld seams, edges, corners and irregular steel surfaces.

Which machine and fitting should I check?

Angle grinder or compatible machine as specified on label. Match the product dimensions and fitting to your tool. Check the product label and machine instructions for the permitted operating speed and setup.

What should I check before fitting this product?

Check the product dimensions, mounting or shank size and speed rating against your machine. Use only for the intended application and follow the product label.

Shopping Cart