Wire Brush Wheel
75mm Twist Knot Cup Wire Brush Wheel – Stainless Steel
$15.20 Ex GST
Perfect for rust removal, cleaning welds and surface preparation.
75mm Twist Knot Cup Wire Brush – Stainless is an X Flex abrasive product intended for professional metal fabrication, workshop maintenance and general industrial use. Stainless wire cup brush for cleaning stainless steel surfaces where steel contamination should be avoided. This product is suited to users who want practical, reliable consumables that are easy to understand, easy to reorder and suitable for day-to-day trade work. For customers comparing abrasive products online, the key points to check are the size, material suitability, machine compatibility, pack quantity and safe operating speed. X Flex product pages should clearly show these details so the customer can choose the correct item before placing an order. This product should be used only for its intended application and with a compatible machine. Correct use helps improve finish quality, user control and product life, while incorrect use can reduce performance and create safety risks.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | X Flex |
| Product Type | Twist Knot Cup Wire Brush |
| Diameter | 75 mm |
| Wire Material | Stainless steel wire |
| Thread / Bore | Verify packaging |
| Compatible Machine | Angle grinder or compatible machine as specified on label |
| Application | Cleaning stainless steel surfaces |
| Country of Manufacture | Verify packaging |
Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.
| Section | Details |
|---|---|
| Ideal Applications | Cleaning stainless steel welds. Removing heat tint, light scale and surface contamination. Preparing stainless surfaces before finishing. Maintenance work on stainless components. |
| Suitable Materials | Stainless steel. Suitable non-ferrous applications where confirmed by user. |
| Recommended Machine | Compatible angle grinder or tool as specified by brush thread and rating. |
| Best For | Stainless steel cleaning where carbon steel contamination should be avoided. |
| Do Not Use For | Using on carbon steel first, then stainless steel. Using above rated speed. Heavy stock removal. |
| Practical Workshop Note | Keep stainless brushes dedicated to stainless work to reduce cross-contamination. |
Wire brush wheels are designed for surface cleaning, rust removal, paint removal, scale removal and weld spatter cleaning. Wire brushes can shed wires during use, so guarding and PPE are critical.
| Intended Use | Removing rust, paint, mill scale, weld spatter and surface contamination from suitable metal surfaces. |
| Compatible Machine | Angle grinder or suitable power tool matching brush size, thread/bore and speed rating. |
| Before Use | Inspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products. |
| PPE | Safety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present. |
| Speed Check | Confirm that the machine speed does not exceed the maximum speed/RPM marked on the product label. |
| Guarding | Use the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product. |
| Never Use For | Cutting, grinding heavy material, use without PPE, use above marked RPM, or use when wires are badly worn, bent or broken. |
• Wear eye and face protection at all times.
• Stand clear of the brush plane during start-up.
• Use light to moderate pressure; let the wire tips do the work.
• Avoid snagging on sharp edges.
• Replace brushes with damaged hubs or excessive wire loss.
• Pressing too hard and bending wires.
• Using without a face shield.
• Removing guards.
• Using a brush with loose or broken wires.
• Using the wrong brush type for stainless steel and risking contamination.
Related products
-
Sanding Belt & Linishing Belt
20x520mm Zirconia Sanding Belts 60 Grit – 10 Pack
Pack of 10 - $20.00 Ex GST
($2.00 each) Add to cart -
Cutting Discs
115x1mm (4.5”) Inox Cutting Disc – 25 Pack
Pack of 25 - $33.75 Ex GST
($1.35 each) Add to cart -
Cutting Discs
180×1.6mm (7”) Inox Cutting Disc – 25 Pack
Pack of 25 - $70.00 Ex GST
($2.80 each) Add to cart
Related Products
Frequently Asked Questions
Is this suitable for professional workshop use?
Yes, when the product matches the machine, material and application
What should I check before buying?
Check size, bore, grit or thickness, pack quantity, grinder or machine compatibility and material suitability.
Can this be used outside its intended purpose?
No. Cutting, grinding, brushing, linishing and burr products must be used only for their designed applications.
Reviews
There are no reviews yet.