“125mm (5′) Zirconia Flap Disc – 10 Pack” has been added to your cart. View cart

125mm (5′) Zirconia Flap Disc – 10 Pack

Pack of 10 - $39.00 Ex GST
($3.90 each)

Perfect blend at cutting power and polish – ideal for shaping, smoothing and finishing.

125mm Zirconia Flap Disc Type 29 G60 – 10 Pack is an X Flex abrasive product intended for professional metal fabrication, workshop maintenance and general industrial use. 125mm zirconia flap disc suited to common fabrication work where stock removal and finishing are both required. This product is suited to users who want practical, reliable consumables that are easy to understand, easy to reorder and suitable for day-to-day trade work. For customers comparing abrasive products online, the key points to check are the size, material suitability, machine compatibility, pack quantity and safe operating speed. X Flex product pages should clearly show these details so the customer can choose the correct item before placing an order. This
product should be used only for its intended application and with a compatible machine. Correct use helps improve finish quality, user control and product life, while incorrect use can reduce performance and create safety risks.

Technical Specifications

Specification	Details
Brand	X Flex
Product Type	Flap Disc
Disc Type / Profile	Type 29 Angled Flap Disc
Diameter	125 mm
Bore Size	22.23 mm
Abrasive / Grit	Zirconia G60
Backing	Fibreglass backing (verify if applicable)
Maximum RPM	12,250 RPM typical for 125 mm discs – verify label
Compatible Machine	125 mm angle grinder
Pack Quantity	10 discs
Country of Manufacture	India

Additional information
Reviews (0)

Size	125mm

Reviews

There are no reviews yet.

Be the first to review “125mm (5′) Zirconia Flap Disc – 10 Pack”

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

Section	Details
Ideal Applications	Weld blending and cleanup. Deburring edges. Finishing steel surfaces before coating. Removing light rust or scale. Smoothing fabrication marks.
Suitable Materials	Mild steel. Stainless steel. General metalwork.
Recommended Machine	125 mm angle grinder with correct guard fitted.
Best For	Fabrication workshops that need a balance of stock removal and finish quality.
Do Not Use For	Cutting. Heavy weld removal where a grinding disc is faster. Wet use unless the product specifically allows it.
Practical Workshop Note	A Type 29 angle helps with stock removal on edges and welds while still producing a controlled finish.

Flap discs are designed for grinding, blending and finishing. They remove material while producing a smoother finish than a standard grinding disc when used correctly.

Intended Use	Weld blending, deburring, edge finishing, rust removal and surface preparation on suitable metals.
Compatible Machine	Angle grinder matching disc diameter and label speed requirements.
Before Use	Inspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPE	Safety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed Check	Confirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
Guarding	Use the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use For	Straight cutting, use above marked RPM, grinding with missing or damaged flaps, or use on unsuitable machines.

• Use the recommended working angle for the flap disc type.
• Apply controlled pressure rather than forcing the disc.
• Keep the disc moving to prevent heat marks.
• Inspect for missing, torn or lifted flaps before use.
• Replace when flaps are worn or uneven

• Using for cut-off work.
• Running past the marked speed.
• Using excessive pressure that burns the workpiece.
• Continuing to use a disc with damaged flaps.
• Using the wrong grit for the finish required.

Frequently Asked Questions

Is this suitable for professional workshop use?

Yes, when the product matches the machine, material and application.

What should I check before buying?

Check size, bore, grit or thickness, pack quantity, grinder or machine compatibility and material suitability

Can this be used outside its intended purpose?

No. Cutting, grinding, brushing, linishing and burr products must be used only for their designed applications.

125mm (5′) Zirconia Flap Disc – 10 Pack

Reviews

Related Products

115mm (4.5”) Zirconia Flap Disc – 10 Pack