115mm (4.5”) Zirconia Flap Disc – 10 Pack

Pack of 10 - $36.00 Ex GST
($3.60 each)

Perfect blend at cutting power and polish – ideal for shaping, smoothing and finishing.
115mm Zirconia Flap Disc Type 29 G60 – 10 Pack is an X Flex abrasive product intended for professional metal fabrication, workshop maintenance and general industrial use. Angled Type 29 zirconia flap disc for grinding and blending steel with a smoother finish than a hard grinding disc. This product is suited to users who want practical, reliable consumables that are
easy to understand, easy to reorder and suitable for day-to-day trade work. For customers comparing abrasive products online, the key points to check are the size, material suitability, machine compatibility, pack quantity and safe operating speed. X Flex product pages should clearly show these details so the customer can choose the correct item before placing an order. This
product should be used only for its intended application and with a compatible machine. Correct use helps improve finish quality, user control and product life, while incorrect use can reduce performance and create safety risks

Technical Specifications

Specification	Details
Brand	X Flex
Product Type	Flap Disc
Disc Type / Profile	Type 29 Angled Flap Disc
Diameter	115 mm
Bore Size	22.23 mm
Abrasive / Grit	Zirconia G60
Backing	Fibreglass backing (verify if applicable)
Maximum RPM	13,300 RPM typical for 115 mm discs – verify label
Compatible Machine	115 mm angle grinder
Pack Quantity	10 discs
Country of Manufacture	India

Additional information
Reviews (0)

Size	115mm

Reviews

There are no reviews yet.

Be the first to review “115mm (4.5”) Zirconia Flap Disc – 10 Pack”

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

Section	Details
Ideal Applications	Weld blending. Edge finishing. Deburring cut steel. Rust removal and surface preparation. Smoothing after grinding.
Suitable Materials	Mild steel. Stainless steel. General metal fabrication materials.
Recommended Machine	115 mm angle grinder with correct guard fitted.
Best For	Finishing and blending jobs where a smoother result is needed than a standard grinding disc.
Do Not Use For	Cutting. Heavy gouging where a grinding disc is more suitable. Using on materials not confirmed suitable by label.
Practical Workshop Note	Use lighter pressure than a grinding disc to keep the flap disc cutting cleanly and finishing evenly.

Flap discs are designed for grinding, blending and finishing. They remove material while producing a smoother finish than a standard grinding disc when used correctly.

Intended Use	Weld blending, deburring, edge finishing, rust removal and surface preparation on suitable metals.
Compatible Machine	Angle grinder matching disc diameter and label speed requirements.
Before Use	Inspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPE	Safety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed Check	Confirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
Guarding	Use the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use For	Straight cutting, use above marked RPM, grinding with missing or damaged flaps, or use on unsuitable machines.

• Use the recommended working angle for the flap disc type.
• Apply controlled pressure rather than forcing the disc.
• Keep the disc moving to prevent heat marks.
• Inspect for missing, torn or lifted flaps before use.
• Replace when flaps are worn or uneven.

• Using for cut-off work.
• Running past the marked speed.
• Using excessive pressure that burns the workpiece.
• Continuing to use a disc with damaged flaps.
• Using the wrong grit for the finish required.

Frequently Asked Questions

Is this suitable for professional workshop use?

Yes, when the product matches the machine, material and application.

What should I check before buying?

Check size, bore, grit or thickness, pack quantity, grinder or machine compatibility and material suitability

Can this be used outside its intended purpose?

No. Cutting, grinding, brushing, linishing and burr products must be used only for their designed applications.

115mm (4.5”) Zirconia Flap Disc – 10 Pack

Reviews

Related Products