Sale!

115mm (4.5”) Zirconia Flap Disc – 10 Pack

Pack of 10 — Original price was: $36.00.Current price is: $33.00.
($3.30 each)

115mm zirconia flap discs for weld blending, edge finishing, deburring and surface preparation on steel and stainless steel.

  • Diameter: 115 mm
  • Bore Size: 22.23 mm
  • Pack quantity: 10 per pack
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeFlap Disc
Disc Type / ProfileType 29 Angled Flap Disc
Diameter115 mm
Bore Size22.23 mm
Abrasive / GritZirconia G60
BackingFibreglass backing (verify if applicable)
Maximum RPM13,300 RPM typical for 115 mm discs – verify label
Compatible Machine115 mm angle grinder
Pack Quantity10 discs
Country of ManufactureIndia

115mm Zirconia Flap Disc

X Flex 115mm Zirconia Flap Disc — pack of 10.

115mm zirconia flap discs for weld blending, edge finishing, deburring and surface preparation on steel and stainless steel.

Applications

  • Weld blending.
  • Edge finishing.
  • Deburring cut steel.
  • Rust removal and surface preparation.
  • Smoothing after grinding.

Size and Compatibility

  • Diameter: 115 mm
  • Bore Size: 22.23 mm
  • Abrasive / Grit: Zirconia G60
  • Disc Type / Profile: Type 29 Angled Flap Disc
  • Compatible machine: 115 mm angle grinder
  • Pack quantity: 10 per pack

Check the product label and machine instructions for fitting, operating speed and safe use before starting work.

Browse the X Flex abrasive range for other sizes and workshop consumables.

Size

115mm

Reviews

There are no reviews yet.

Be the first to review “115mm (4.5”) Zirconia Flap Disc – 10 Pack”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

SectionDetails
Ideal ApplicationsWeld blending.
Edge finishing.
Deburring cut steel.
Rust removal and surface preparation.
Smoothing after grinding.
Suitable MaterialsMild steel.
Stainless steel.
General metal fabrication materials.
Recommended Machine115 mm angle grinder with correct guard fitted.
Best ForFinishing and blending jobs where a smoother result is needed than a standard grinding disc.
Do Not Use ForCutting.
Heavy gouging where a grinding disc is more suitable.
Using on materials not confirmed suitable by label.
Practical Workshop NoteUse lighter pressure than a grinding disc to keep the flap disc cutting cleanly and finishing evenly.

Flap discs are designed for grinding, blending and finishing. They remove material while producing a smoother finish than a standard grinding disc when used correctly.

Intended UseWeld blending, deburring, edge finishing, rust removal and surface preparation on suitable metals.
Compatible MachineAngle grinder matching disc diameter and label speed requirements.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForStraight cutting, use above marked RPM, grinding with missing or damaged flaps, or use on unsuitable machines.

• Use the recommended working angle for the flap disc type.
• Apply controlled pressure rather than forcing the disc.
• Keep the disc moving to prevent heat marks.
• Inspect for missing, torn or lifted flaps before use.
• Replace when flaps are worn or uneven.

• Using for cut-off work.
• Running past the marked speed.
• Using excessive pressure that burns the workpiece.
• Continuing to use a disc with damaged flaps.
• Using the wrong grit for the finish required.

More from Flap Discs

  • Flap Discs

    125mm (5”) Zirconia Flap Disc – 10 Pack

    Pack of 10 — $39.00
    ($3.90 each)
    Add to cart

Frequently Asked Questions

What is this flap disc used for?

115mm zirconia flap discs for weld blending, edge finishing, deburring and surface preparation on steel and stainless steel.

Which machine and fitting should I check?

115 mm angle grinder. Match the product dimensions and fitting to your tool. Check the product label and machine instructions for the permitted operating speed and setup.

How many are supplied in a pack?

Pack of 10.

Shopping Cart