“25x20mm Aluminium Oxide Mounted Flap Wheel 60 Grit – 10 Pack” has been added to your cart. View cart

50x30mm Aluminium Oxide Mounted Flap Wheel 60 Grit – 10 Pack

Pack of 10 - $30.00 Ex GST
($3.00 each)

Ideal for Something surface finishing and grinding holes, slots, and cut outs. With smooth and flare motion.
50 x 30 x 6mm Mounted Flap Wheel A/O G60 – 10 Pack is an X Flex abrasive product intended for professional metal fabrication, workshop maintenance and general industrial use. Mounted flap wheel for blending, deburring and finishing small to medium metal surfaces. This product is suited to users who want practical, reliable consumables that are easy to understand, easy to reorder and suitable for day-to-day trade work. For customers comparing abrasive products online, the key points to check are the size, material suitability, machine compatibility, pack quantity and safe operating speed. X Flex product pages should clearly show these details so the customer can choose the correct item before placing an order. This product should be used only for its intended application and with a compatible machine. Correct use helps improve finish quality, user control and product life, while incorrect use can reduce performance and create safety risks.

Technical Specifications

Specification	Details
Brand	X Flex
Product Type	Mounted Flap Wheel
Size	50 × 30 × 6 mm
Shank Diameter	6 mm
Abrasive / Grit	Aluminium Oxide G60
Compatible Machine	Die grinder / drill depending on rated speed and application
Application	Internal finishing and small-area sanding
Maximum RPM	Verify product label
Country of Manufacture	Verify packaging

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “50x30mm Aluminium Oxide Mounted Flap Wheel 60 Grit – 10 Pack”

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

Section	Details
Ideal Applications	Blending inside pipe and tube ends. Deburring larger openings. Finishing curved or internal surfaces. Cleaning fabrication marks in confined areas.
Suitable Materials	Mild steel. Stainless steel. General metal fabrication materials.
Recommended Machine	Die grinder or rotary tool with compatible 6 mm collet.
Best For	Internal blending and finishing where a flap disc cannot access the area.
Do Not Use For	Cutting. Heavy grinding. Using if the shank is bent or wheel is damaged.
Practical Workshop Note	Use smooth passes and avoid forcing the wheel into corners.

X Flex Mounted Flap Wheels are supplied in two sizes: 25 x 20 x 6mm G60 and 50 x 30 x 6mm G60. They are used with die grinders for internal deburring, blending and finishing in confined areas.

Intended Use	Internal finishing, deburring, blending and surface preparation inside holes, pipes, corners and hard-to-reach locations.
Compatible Machine	Die grinder or rotary tool with correct 6 mm collet and suitable speed range.
Before Use	Inspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPE	Safety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed Check	Confirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
Guarding	Use the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use For	Heavy stock removal, use with damaged flaps, excessive side force, use in an incorrect collet, or use above marked speed.

• Check flap condition before use.
• Secure the 6mm shank correctly in the collet.
• Use light, controlled pressure.
• Allow the wheel to follow the contour without forcing it.
• Replace when flaps are worn, missing or damaged.

• Using as a cutting tool.
• Running with loose shank fitment.
• Forcing into sharp edges.
• Using after flap damage appears.
• Exceeding the safe speed for the mounted wheel.

Frequently Asked Questions

Is this suitable for professional workshop use?

Yes, when the product matches the machine, material and application.

What should I check before buying?

Check size, bore, grit or thickness, pack quantity, grinder or machine compatibility and material suitability.

Can this be used outside its intended purpose?

No. Cutting, grinding, brushing, linishing and burr products must be used only for their designed applications.

50x30mm Aluminium Oxide Mounted Flap Wheel 60 Grit – 10 Pack

Reviews

Related Products

25x20mm Aluminium Oxide Mounted Flap Wheel 60 Grit – 10 Pack