125mm (5”) Zirconia Fibre Disc 36 Grit – 25 Pack

Pack of 25 — $50.00
($2.00 each)

Zirconia fibre discs for coarse stock removal on steel and stainless steel. Use with a compatible fibre disc backing pad.

  • Pack quantity: 25 discs
  • Diameter: 125 mm
  • Abrasive / Grit: Zirconia G36
  • Required Accessory: Use with compatible fibre disc backing pad
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeFibre Disc
Diameter125 mm
Abrasive / GritZirconia G36
BackingFibre backing
Required AccessoryUse with compatible fibre disc backing pad
Compatible Machine125 mm angle grinder with backing pad
Pack Quantity25 discs
Country of ManufactureIndia

125mm Zirconia Fibre Disc 36 Grit

X Flex 125mm Zirconia Fibre Disc 36 Grit — 25 discs.

Zirconia fibre discs for coarse stock removal on steel and stainless steel. Use with a compatible fibre disc backing pad.

Applications

Heavy deburring.
Weld dressing.
Removing scale and rust.
Preparing steel before further finishing.

Suitable materials: Mild steel. Stainless steel. General steel fabrication.

Size and Compatibility

  • Diameter: 125 mm
  • Abrasive / Grit: Zirconia G36
  • Required Accessory: Use with compatible fibre disc backing pad
  • Compatible Machine: 125 mm angle grinder with backing pad
  • Pack Quantity: 25 discs

Check the product label and machine instructions for fitting, operating speed and safe use before starting work.

Browse the X Flex abrasive range for other sizes and workshop consumables.

Size

125mm

Reviews

There are no reviews yet.

Be the first to review “125mm (5”) Zirconia Fibre Disc 36 Grit – 25 Pack”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

SectionDetails
Ideal ApplicationsHeavy deburring.
Weld dressing.
Removing scale and rust.
Preparing steel before further finishing.
Suitable MaterialsMild steel.
Stainless steel.
General steel fabrication.
Recommended Machine125 mm angle grinder with suitable fibre disc backing pad.
Best ForFast stock removal on larger surfaces using a 125 mm grinder.
Do Not Use ForRunning without a backing pad.
Cutting.
Finishing work that needs a finer grit.
Practical Workshop NoteUse firm but controlled pressure and keep the disc moving to avoid heat build-up.

Fibre discs are used with compatible backing pads for grinding, sanding and surface preparation. They must be correctly supported by the backing pad and used at the proper angle.

Intended UseStock removal, weld dressing, deburring, rust/paint removal and surface preparation on suitable metal surfaces.
Compatible MachineAngle grinder with the correct backing pad and locking system.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForUse without a backing pad, use with damaged pad, cutting work, use above speed rating, or use when the disc is torn or cracked.

• Fit only with a compatible backing pad.
• Check the disc and pad before use.
• Use the correct grit for the job.
• Use controlled pressure to avoid tearing or overheating.
• Replace torn or loaded discs.

• Running without a backing pad.
• Using a backing pad that is too small or damaged.
• Forcing the disc into sharp edges.
• Using a clogged disc.
• Exceeding marked speed limits.

More from Fibre Sanding Discs & Backing Pads

  • Fibre Sanding Discs & Backing Pads

    115mm (4.5”) Fiber Disc Backing Pad

    $12.60 Add to cart
  • Sale! 115mm (4.5”) Zirconia Fibre Disc 60 Grit - 25 PackSale! Add to cart
    Fibre Sanding Discs & Backing Pads

    115mm (4.5”) Zirconia Fibre Disc 60 Grit – 25 Pack

    Pack of 25 — Original price was: $37.50.Current price is: $33.75.
    ($1.35 each)
    Add to cart
  • Sale! 115mm (4.5”) Zirconia Fibre Disc 36 Grit - 25 PackSale! Add to cart
    Fibre Sanding Discs & Backing Pads

    115mm (4.5”) Zirconia Fibre Disc 36 Grit – 25 Pack

    Pack of 25 — Original price was: $45.00.Current price is: $40.00.
    ($1.60 each)
    Add to cart
  • Fibre Sanding Discs & Backing Pads

    125mm (5”) Fibre Disc Backing Pad

    $14.40 Add to cart

Frequently Asked Questions

What is 125mm Zirconia Fibre Disc 36 Grit used for?

Zirconia fibre discs for coarse stock removal on steel and stainless steel. Use with a compatible fibre disc backing pad.

What size and machine compatibility should I check?

Diameter: 125 mm; Abrasive / Grit: Zirconia G36; Required Accessory: Use with compatible fibre disc backing pad; Compatible Machine: 125 mm angle grinder with backing pad. Check the product label and your machine instructions before fitting.

What pack quantity is supplied?

Supplied quantity: 25 discs.

Shopping Cart