100x1220mm Zirconia Linishing Belt 60 Grit – 10 Pack

Pack of 10 — $80.00
($8.00 each)

60-grit zirconia linishing belts for preparing flat steel surfaces, smoothing edges and blending welds.

  • Belt Size: 100 × 1220 mm
  • Pack quantity: 10 per pack
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeLinishing Belt
Belt Size100 × 1220 mm
Abrasive / GritZirconia G60
BackingCloth backing (verify packaging)
Joint TypeVerify packaging
Compatible MachineLinisher / belt grinder of matching size
ApplicationGrinding, deburring and surface preparation
Pack Quantity10 belts
Country of ManufactureVerify packaging

100x1220mm Zirconia Linishing Belt 60 Grit

X Flex 100x1220mm Zirconia Linishing Belt 60 Grit — pack of 10.

60-grit zirconia linishing belts for preparing flat steel surfaces, smoothing edges and blending welds.

Applications

  • Preparing flat steel surfaces.
  • Deburring and edge smoothing.
  • Weld blending.
  • General linishing on larger components.

Size and Compatibility

  • Belt Size: 100 × 1220 mm
  • Abrasive / Grit: Zirconia G60
  • Compatible machine: Linisher / belt grinder of matching size
  • Pack quantity: 10 per pack

Check the product label and machine instructions for fitting, operating speed and safe use before starting work.

Browse the X Flex abrasive range for other sizes and workshop consumables.

Reviews

There are no reviews yet.

Be the first to review “100x1220mm Zirconia Linishing Belt 60 Grit – 10 Pack”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

SectionDetails
Ideal ApplicationsPreparing flat steel surfaces.
Deburring and edge smoothing.
Weld blending.
General linishing on larger components.
Suitable MaterialsMild steel.
Stainless steel.
Steel fabrication components.
Recommended MachineCompatible linisher accepting 100 × 1220 mm belts.
Best ForLarger workshops needing wide belt coverage and stable finishing.
Do Not Use ForUnsupported small workpieces.
Wrong machine size.
Running damaged or torn belts.
Practical Workshop NoteWide belts give good surface coverage but still need correct pressure and tracking.

Linishing belts are used on belt sanders and linishing machines for grinding, deburring, blending and surface finishing. Correct belt tracking, tension and workpiece control are essential.

Intended UseWeld blending, edge finishing, deburring, stock removal and surface preparation on suitable materials.
Compatible MachineBelt linisher or belt sander matching the belt size and machine requirements.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForUse on incorrect belt size, damaged belt, poor tracking, loose guards, wet conditions unless designed for it, or unsupported workpieces.

• Check belt direction, tracking and tension before use.
• Start the machine and confirm smooth running before applying work.
• Hold the workpiece securely.
• Avoid excessive pressure that overheats the belt and workpiece.
• Keep hands clear of pinch points.

• Using a torn belt.
• Ignoring belt tracking problems.
• Pressing too hard to speed up grinding.
• Working too close to rollers or pinch points.
• Using the wrong grit for the finish required.

More from Sanding & Linishing Belts

  • Sanding & Linishing Belts

    50x1220mm Zirconia Linishing Belt 60 Grit – 10 Pack

    Pack of 10 — $48.00
    ($4.80 each)
    Add to cart
  • Sanding & Linishing Belts

    50x914mm Zirconia Linishing Belt 60 Grit – 10 Pack

    Pack of 10 — $40.00
    ($4.00 each)
    Add to cart
  • Sanding & Linishing Belts

    10×330 Zirconia Sanding Belts 60 Grit – 25 Pack

    Pack of 25 — $27.50
    ($1.10 each)
    Add to cart
  • Sanding & Linishing Belts

    100x914mm Zirconia Linishing Belt 60 Grit – 10 Pack

    Pack of 10 — $68.00
    ($6.80 each)
    Add to cart

Frequently Asked Questions

What is this linishing belt used for?

60-grit zirconia linishing belts for preparing flat steel surfaces, smoothing edges and blending welds.

Which machine and fitting should I check?

Linisher / belt grinder of matching size. Match the product dimensions and fitting to your tool. Check the product label and machine instructions for the permitted operating speed and setup.

How many are supplied in a pack?

Pack of 10.

Shopping Cart