115mm (4.5”) Zirconia Fibre Disc 36 Grit – 25 Pack

Pack of 25 - $45.00 Ex GST
($1.80 each)

Designed for steel and stainless steel. Delivers faster material removal and surface finishing. Grit 36 is high stock removal and Grit 60 is for smooth finishing.
115mm Zirconia Fibre Disc G36 – 25 Pack is an X Flex abrasive product intended for professional metal fabrication, workshop maintenance and general industrial use. Coarse zirconia fibre disc for aggressive stock removal and fast surface preparation. This product is suited to users who want practical, reliable consumables that are easy to understand, easy to reorder and suitable for day-to-day trade work. For customers comparing abrasive products online, the key points to check are the size, material suitability, machine compatibility, pack quantity and safe operating speed. X Flex product pages should clearly show these details so the customer can choose the correct item before placing an order. This product should be used only for its intended application and with a compatible machine. Correct use helps improve finish quality, user control and product life, while incorrect use can reduce performance and create safety risks.

Technical Specifications

Specification	Details
Brand	X Flex
Product Type	Fibre Disc
Diameter	115 mm
Abrasive / Grit	Zirconia G36
Backing	Fibre backing
Required Accessory	Use with compatible fibre disc backing pad
Compatible Machine	115 mm angle grinder with backing pad
Pack Quantity	25 discs
Country of Manufacture	India

Additional information
Reviews (0)

Size	115mm

Reviews

There are no reviews yet.

Be the first to review “115mm (4.5”) Zirconia Fibre Disc 36 Grit – 25 Pack”

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

Section	Details
Ideal Applications	Rapid material removal. Weld dressing. Deburring. Rust and scale removal. Surface preparation before finishing.
Suitable Materials	Mild steel. Stainless steel. Fabricated steel components.
Recommended Machine	115 mm angle grinder with suitable fibre disc backing pad.
Best For	Users who need aggressive stock removal with good control.
Do Not Use For	Using without a backing pad. Cutting. Fine finishing where G60 or a flap disc is more suitable.
Practical Workshop Note	Always use the correct backing pad. Fibre discs are not designed to run unsupported.

Fibre discs are used with compatible backing pads for grinding, sanding and surface preparation. They must be correctly supported by the backing pad and used at the proper angle.

Intended Use	Stock removal, weld dressing, deburring, rust/paint removal and surface preparation on suitable metal surfaces.
Compatible Machine	Angle grinder with the correct backing pad and locking system.
Before Use	Inspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPE	Safety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed Check	Confirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
Guarding	Use the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use For	Use without a backing pad, use with damaged pad, cutting work, use above speed rating, or use when the disc is torn or cracked.

• Fit only with a compatible backing pad.
• Check the disc and pad before use.
• Use the correct grit for the job.
• Use controlled pressure to avoid tearing or overheating.
• Replace torn or loaded discs.

• Running without a backing pad.
• Using a backing pad that is too small or damaged.
• Forcing the disc into sharp edges.
• Using a clogged disc.
• Exceeding marked speed limits.

Frequently Asked Questions

Is this suitable for professional workshop use?

Yes, when the product matches the machine, material and application.

What should I check before buying?

Check size, bore, grit or thickness, pack quantity, grinder or machine compatibility and material suitability.

Can this be used outside its intended purpose?

No. Cutting, grinding, brushing, linishing and burr products must be used only for their designed applications.

115mm (4.5”) Zirconia Fibre Disc 36 Grit – 25 Pack

Reviews

Related Products

115mm (4.5”) Fiber Disc Backing Pad