50x30mm Aluminium Oxide Mounted Flap Wheel 60 Grit – 10 Pack

Pack of 10 — $30.00
($3.00 each)

60-grit aluminium oxide mounted flap wheel for blending pipe and tube ends and finishing curved or internal surfaces.

  • Size: 50 × 30 × 6 mm
  • Shank Diameter: 6 mm
  • Pack quantity: 10 per pack
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeMounted Flap Wheel
Size50 × 30 × 6 mm
Shank Diameter6 mm
Abrasive / GritAluminium Oxide G60
Compatible MachineDie grinder / drill depending on rated speed and application
ApplicationInternal finishing and small-area sanding
Maximum RPMVerify product label
Country of ManufactureVerify packaging

50x30mm Aluminium Oxide Mounted Flap Wheel 60 Grit

X Flex 50x30mm Aluminium Oxide Mounted Flap Wheel 60 Grit — pack of 10.

60-grit aluminium oxide mounted flap wheel for blending pipe and tube ends and finishing curved or internal surfaces.

Applications

  • Blending inside pipe and tube ends.
  • Deburring larger openings.
  • Finishing curved or internal surfaces.
  • Cleaning fabrication marks in confined areas.

Size and Compatibility

  • Size: 50 × 30 × 6 mm
  • Shank Diameter: 6 mm
  • Abrasive / Grit: Aluminium Oxide G60
  • Compatible machine: Die grinder / drill depending on rated speed and application
  • Pack quantity: 10 per pack

Check the product label and machine instructions for fitting, operating speed and safe use before starting work.

Browse the X Flex abrasive range for other sizes and workshop consumables.

Reviews

There are no reviews yet.

Be the first to review “50x30mm Aluminium Oxide Mounted Flap Wheel 60 Grit – 10 Pack”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

SectionDetails
Ideal ApplicationsBlending inside pipe and tube ends.
Deburring larger openings.
Finishing curved or internal surfaces.
Cleaning fabrication marks in confined areas.
Suitable MaterialsMild steel.
Stainless steel.
General metal fabrication materials.
Recommended MachineDie grinder or rotary tool with compatible 6 mm collet.
Best ForInternal blending and finishing where a flap disc cannot access the area.
Do Not Use ForCutting.
Heavy grinding.
Using if the shank is bent or wheel is damaged.
Practical Workshop NoteUse smooth passes and avoid forcing the wheel into corners.

X Flex Mounted Flap Wheels are supplied in two sizes: 25 x 20 x 6mm G60 and 50 x 30 x 6mm G60. They are used with die grinders for internal deburring, blending and finishing in confined areas.

Intended UseInternal finishing, deburring, blending and surface preparation inside holes, pipes, corners and hard-to-reach locations.
Compatible MachineDie grinder or rotary tool with correct 6 mm collet and suitable speed range.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForHeavy stock removal, use with damaged flaps, excessive side force, use in an incorrect collet, or use above marked speed.

• Check flap condition before use.
• Secure the 6mm shank correctly in the collet.
• Use light, controlled pressure.
• Allow the wheel to follow the contour without forcing it.
• Replace when flaps are worn, missing or damaged.

• Using as a cutting tool.
• Running with loose shank fitment.
• Forcing into sharp edges.
• Using after flap damage appears.
• Exceeding the safe speed for the mounted wheel.

More from Mounted Flap Wheels

  • Mounted Flap Wheels

    25x20mm Aluminium Oxide Mounted Flap Wheel 60 Grit – 10 Pack

    Pack of 10 — $18.00
    ($1.80 each)
    Add to cart

Frequently Asked Questions

What is this mounted flap wheel used for?

60-grit aluminium oxide mounted flap wheel for blending pipe and tube ends and finishing curved or internal surfaces.

Which machine and fitting should I check?

Die grinder / drill depending on rated speed and application. Match the product dimensions and fitting to your tool. Check the product label and machine instructions for the permitted operating speed and setup.

How many are supplied in a pack?

Pack of 10.

Shopping Cart