125x6mm (5”) Grinding Disc – 10 Pack

Pack of 10 — $31.00
($3.10 each)

125mm grinding discs for dressing weld beads, deburring steel sections and preparing bevels before welding.

  • Diameter: 125 mm
  • Thickness: 6.0 mm
  • Bore Size: 22.23 mm
  • Pack quantity: 10 per pack
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeGrinding Disc
Disc Type / ProfileDepressed Centre Grinding Disc
Diameter125 mm
Thickness6.0 mm
Bore Size22.23 mm
Abrasive / GradeAluminium Oxide bonded abrasive (verify label grade)
Maximum Operating Speed80 m/s
Maximum RPM12,250 RPM typical for 125 mm discs – verify label
Compatible Machine125 mm angle grinder
Safety StandardEN 12413
Pack Quantity10 discs
Country of ManufactureIndia

125x6mm Grinding Disc

X Flex 125x6mm Grinding Disc — pack of 10.

125mm grinding discs for dressing weld beads, deburring steel sections and preparing bevels before welding.

Applications

  • Grinding weld beads and fabrication joints.
  • Deburring cut steel sections.
  • Bevel preparation before welding.
  • Surface cleaning before painting or coating.

Size and Compatibility

  • Diameter: 125 mm
  • Thickness: 6.0 mm
  • Bore Size: 22.23 mm
  • Disc Type / Profile: Depressed Centre Grinding Disc
  • Compatible machine: 125 mm angle grinder
  • Pack quantity: 10 per pack

Check the product label and machine instructions for fitting, operating speed and safe use before starting work.

Browse the X Flex abrasive range for other sizes and workshop consumables.

Size

125mm

Reviews

There are no reviews yet.

Be the first to review “125x6mm (5”) Grinding Disc – 10 Pack”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

SectionDetails
Ideal ApplicationsGrinding weld beads and fabrication joints.
Deburring cut steel sections.
Bevel preparation before welding.
Surface cleaning before painting or coating.
Suitable MaterialsMild steel.
Carbon steel.
Structural steel.
General ferrous metals.
Recommended Machine125 mm angle grinder with correct guard fitted.
Best ForBoilermakers and fabricators using 125 mm grinders for regular grinding work.
Do Not Use ForCutting through material.
Using on stainless steel unless confirmed on label.
Grinding without correct guard and PPE.
Practical Workshop NoteA steady grinding angle helps improve control and reduces unnecessary disc wear.

Grinding discs are intended for grinding operations such as weld removal, bevel preparation and heavy stock removal. They are not intended for thin cutting operations.

SectionDetails
Intended UseGrinding, weld removal, edge preparation, bevel grinding, cleaning and stock removal on suitable metal workpieces.
Compatible MachineAngle grinder matching the disc diameter, bore size and maximum speed marking.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForThin cutting, use on an incorrect grinder size, use without guard, use on materials not suitable for the disc, or grinding with a damaged disc.
  • Use the correct grinding angle and steady pressure.
  • Avoid jamming the disc into corners.
  • Keep the guard between the operator and the disc where possible.
  • Move smoothly to avoid gouging and overheating.
  • Stop if vibration or unusual noise occurs.
  • Applying excessive pressure.
  • Using a worn or uneven disc.
  • Grinding with the tool at an unsafe angle.
  • Removing the guard to reach tight spaces.
  • Using the wrong disc on stainless steel where contamination is a concern.

More from Grinding Discs

  • Grinding Discs

    125x3mm (5”) Type 42 Grinding Disc – 10 Pack

    Pack of 10 — $24.00
    ($2.40 each)
    Add to cart
  • Grinding Discs

    230x6mm (9”) Grinding Disc – 5 Pack

    Pack of 5 — $30.00
    ($6.00 each)
    Add to cart
  • Sale! X Flex 115×6 mm grinding discSale! Add to cart
    Grinding Discs

    115x6mm (4.5”) Grinding Disc – 10 Pack

    Pack of 10 — Original price was: $29.00.Current price is: $25.00.
    ($2.50 each)
    Add to cart
  • Sale! 115x3mm (4.5”) Type 42 Grinding Disc - 10 PackSale! Add to cart
    Grinding Discs

    115x3mm (4.5”) Type 42 Grinding Disc – 10 Pack

    Pack of 10 — Original price was: $21.50.Current price is: $18.50.
    ($1.85 each)
    Add to cart

Frequently Asked Questions

What is this grinding disc used for?

125mm grinding discs for dressing weld beads, deburring steel sections and preparing bevels before welding.

Which machine and fitting should I check?

125 mm angle grinder. Match the product dimensions and fitting to your tool. Check the product label and machine instructions for the permitted operating speed and setup.

How many are supplied in a pack?

Pack of 10.

Shopping Cart