Sale!

115x3mm (4.5”) Type 41 Cutting Disc – 10 Pack

Pack of 10 — Original price was: $18.50.Current price is: $16.50.
($1.65 each)

Flat Type 41 cutting discs for steel cutting in fabrication and workshop maintenance. For straight cutting only, never side grinding.

  • Diameter: 115 mm
  • Thickness: 3.0 mm
  • Bore Size: 22.23 mm
  • Pack quantity: 10 per pack
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeCutting Disc
Disc Type / ProfileT42 Depressed Centre Cutting Disc
Diameter115 mm
Thickness3.0 mm
Bore Size22.23 mm
Abrasive / GradeA30 grade (verify label)
Maximum Operating Speed80 m/s
Maximum RPM13,300 RPM typical for 115 mm discs – verify label
Compatible Machine115 mm angle grinder
Safety StandardEN 12413
Pack Quantity10 discs
Country of ManufactureIndia

115x3mm Type 41 Cutting Disc

X Flex 115x3mm Type 41 Cutting Disc — pack of 10.

Flat Type 41 cutting discs for steel cutting in fabrication and workshop maintenance. For straight cutting only, never side grinding.

Applications

  • Cutting thicker mild steel sections.
  • Cutting steel pipe, angle, bar and fabrication components.

Size and Compatibility

  • Diameter: 115 mm
  • Thickness: 3.0 mm
  • Bore Size: 22.23 mm
  • Disc Type / Profile: T42 Depressed Centre Cutting Disc
  • Compatible machine: 115 mm angle grinder
  • Pack quantity: 10 per pack

Check the product label and machine instructions for fitting, operating speed and safe use before starting work.

Browse the X Flex abrasive range for other sizes and workshop consumables.

Technical Specifications

Diameter: 115mm, Thickness : 3mm, Bore : 22.23mm, Max RPM: 13,300, Type: 41, Material : Aluminium Oxide (A36TBF), Feature: Self sharpens for faster, consistent cut, Design : Heavy Duty cut with fast, clean cut

Size

115mm

Reviews

There are no reviews yet.

Be the first to review “115x3mm (4.5”) Type 41 Cutting Disc – 10 Pack”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact.
Keep products in original packaging until required.

SectionDetails
Ideal ApplicationsCutting thicker mild steel sections.
Cutting steel pipe, angle, bar and fabrication components.
General workshop cutting where durability is more important than a very thin kerf.
Suitable MaterialsMild steel.
Carbon steel.
General ferrous metal.
Steel pipe, bar and angle.
Recommended Machine115 mm angle grinder with correct guard fitted.
Best ForGeneral-purpose steel cutting where a stronger, thicker disc is preferred.
Do Not Use ForStainless steel unless the product label confirms suitability.
Side grinding or heavy side pressure.
Precision thin cutting where a 1.0 mm disc is more suitable.
Practical Workshop NoteUse steady pressure and avoid forcing the disc. A thicker cutting disc removes more material than a 1.0 mm disc.

Cutting discs are designed for straight cutting only. They must not be used for side grinding or heavy sideways pressure. Correct use helps reduce the risk of disc breakage, kickback and poor cutting control.

SectionDetails
Intended UseStraight cutting of steel, stainless steel, pipe, tube, sheet, angle, flat bar and structural sections where the disc type is suitable for the material.
Compatible MachineAngle grinder or cut-off machine matching the disc diameter and label requirements.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForSide grinding, twisting in the cut, curved cutting, excessive force, using damaged discs, or using without the correct guard.
  • Hold the grinder firmly with both hands where applicable.
  • Keep the disc straight in the cut and avoid twisting.
  • Let the disc do the cutting; do not force it.
  • Support the workpiece so the cut does not close and pinch the disc.
  • Allow the disc to stop completely before placing the tool down.
  • Using a cutting disc for grinding.
  • Overloading the disc to make the cut faster.
  • Cutting without supporting the workpiece.
  • Changing direction while the disc is in the cut.
  • Using a disc after it has been dropped or damaged.

More from Cutting Discs

  • Sale! 125x1mm (5”) Inox Cutting Disc - 25 PackSale! Add to cart
    Cutting Discs

    125x1mm (5”) Inox Cutting Disc – 25 Pack

    Pack of 25 — Original price was: $37.50.Current price is: $31.25.
    ($1.25 each)
    Add to cart
  • Sale! X Flex 115×1 mm Inox cutting discSale! Add to cart
    Cutting Discs

    115x1mm (4.5”) Inox Cutting Disc – 25 Pack

    Pack of 25 — Original price was: $33.75.Current price is: $25.00.
    ($1.00 each)
    Add to cart
  • Cutting Discs

    125x3mm (5”) Type 41 Cutting Disc – 10 Pack

    Pack of 10 — $21.00
    ($2.10 each)
    Add to cart
  • Cutting Discs

    180×1.6mm (7”) Inox Cutting Disc – 25 Pack

    Pack of 25 — $70.00
    ($2.80 each)
    Add to cart

Frequently Asked Questions

What is this cutting disc used for?

Flat Type 41 cutting discs for steel cutting in fabrication and workshop maintenance. For straight cutting only, never side grinding.

Which machine and fitting should I check?

115 mm angle grinder. Match the product dimensions and fitting to your tool. Check the product label and machine instructions for the permitted operating speed and setup.

How many are supplied in a pack?

Pack of 10.

Shopping Cart