Sale!

115x1mm (4.5”) Inox Cutting Disc – 25 Pack

Pack of 25 — Original price was: $33.75.Current price is: $25.00.
($1.00 each)

X Flex 115mm x 1mm Inox Cutting Discs – 25 Pack

Thin Type 41 cutting discs for cutting stainless steel and mild steel in fabrication and workshop applications.

  • Size: 115 x 1 x 22.23mm (4.5 inch)
  • Suitable for compatible 115mm angle grinders
  • Applications: sheet metal, tubing and thin sections
  • Pack quantity: 25 cutting discs

For cutting only—not side grinding. Follow the disc label and grinder instructions, including maximum operating speed, guarding and protective equipment requirements.

Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeInox Cutting Disc
Disc Type / ProfileT41 Flat Cutting Disc
Diameter115 mm
Thickness1.0 mm
Bore Size22.23 mm
Abrasive / GradeAluminium Oxide – A46UBF (verify against label)
Maximum Operating Speed80 m/s
Maximum RPM13,300 RPM (verify against label)
Compatible Machine115 mm Angle Grinder
Safety StandardEN 12413
Pack Quantity25 Discs
Country of ManufactureIndia

115mm Inox Cutting Discs for Stainless Steel and Mild Steel

X Flex 115mm x 1mm Inox cutting discs are supplied in a 25-pack for fabrication and workshop cutting tasks. Applications include stainless steel sheet, mild steel tubing and thin metal sections.

Disc Size and Compatibility

Each disc measures 115 x 1 x 22.23mm and has a flat Type 41 profile. The 1mm thickness provides a narrow cutting width. Use with a compatible 115mm angle grinder, checking the bore size and speed rating against your machine before fitting.

Choosing Your Cutting Disc

This size suits workshops using 115mm grinders. Match the disc to the material and task, and check the dimensions when reordering. Each pack contains 25 discs of the same size.

Compare other sizes in our cutting disc range.

Technical Specifications

115mm, 1mm, 22.23mm, 13,300, Aluminium Oxide (A46UBF), Ideal for Steel and Stainless Steel, Self sharpens for faster, consistent cut, Slim cut for low material loss

Size

115mm

Reviews

There are no reviews yet.

Be the first to review “115x1mm (4.5”) Inox Cutting Disc – 25 Pack”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

SectionDetails
Ideal ApplicationsCutting stainless steel tube, sheet and light sections.
Cutting mild steel, RHS, SHS, pipe, angle and flat bar.
General fabrication, mobile welding repairs and maintenance.
Cutting jobs where reduced burr and less material loss are preferred.
Suitable MaterialsStainless steel (Inox).
Mild steel and carbon steel.
Structural light sections.
Sheet metal, tube and pipe
Recommended Machine115 mm angle grinder with correct guard fitted
Best ForFabricators and boilermakers using 115 mm grinders for regular steel and stainless cutting.
Do Not Use ForGrinding, notching with side pressure or twisting in the cut.
Cutting masonry, concrete or timber.
Using without a guard or with damaged discs.
Practical Workshop NoteKeep the grinder straight in the cut. Twisting a thin cutting disc can cause binding or breakage.

Cutting discs are designed for straight cutting only. They must not be used for side grinding or heavy sideways pressure. Correct use helps reduce the risk of disc breakage, kickback and poor cutting control.

SectionDetails
Intended UseStraight cutting of steel, stainless steel, pipe, tube, sheet, angle, flat bar and structural sections where the disc type is suitable for the material.
Compatible MachineAngle grinder or cut-off machine matching the disc diameter and label requirements.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForSide grinding, twisting in the cut, curved cutting, excessive force, using damaged discs, or using without the correct guard.
  • Hold the grinder firmly with both hands where applicable.
  • Keep the disc straight in the cut and avoid twisting.
  • Let the disc do the cutting; do not force it.
  • Support the workpiece so the cut does not close and pinch the disc.
  • Allow the disc to stop completely before placing the tool down.
  • Using a cutting disc for grinding.
  • Overloading the disc to make the cut faster.
  • Cutting without supporting the workpiece.
  • Changing direction while the disc is in the cut.
  • Using a disc after it has been dropped or damaged.

More from Cutting Discs

  • Sale! X Flex 115×3 mm Type 41 cutting discSale! Add to cart
    Cutting Discs

    115x3mm (4.5”) Type 41 Cutting Disc – 10 Pack

    Pack of 10 — Original price was: $18.50.Current price is: $16.50.
    ($1.65 each)
    Add to cart
  • Cutting Discs

    125x3mm (5”) Type 41 Cutting Disc – 10 Pack

    Pack of 10 — $21.00
    ($2.10 each)
    Add to cart
  • Cutting Discs

    180×1.6mm (7”) Inox Cutting Disc – 25 Pack

    Pack of 25 — $70.00
    ($2.80 each)
    Add to cart
  • Sale! 125x1mm (5”) Inox Cutting Disc - 25 PackSale! Add to cart
    Cutting Discs

    125x1mm (5”) Inox Cutting Disc – 25 Pack

    Pack of 25 — Original price was: $37.50.Current price is: $31.25.
    ($1.25 each)
    Add to cart

Frequently Asked Questions

Is this suitable for professional workshop use?

Yes, when the product matches the machine, material and application.

What should I check before buying?

Check size, bore, grit or thickness, pack quantity, grinder or machine compatibility and material suitability

Can this be used outside its intended purpose?

No. Cutting, grinding, brushing, linishing and burr products must be used only for their designed applications

Shopping Cart