Sale!

115x6mm (4.5”) Grinding Disc – 10 Pack

Pack of 10 — Original price was: $29.00.Current price is: $25.00.
($2.50 each)

115mm grinding discs for weld removal, deburring and edge preparation on mild steel and carbon steel.

  • Diameter: 115 mm
  • Thickness: 6.0 mm
  • Bore Size: 22.23 mm
  • Pack quantity: 10 per pack
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeGrinding Disc
Disc Type / ProfileDepressed Centre Grinding Disc
Diameter115 mm
Thickness6.0 mm
Bore Size22.23 mm
Abrasive / GradeAluminium Oxide bonded abrasive (verify label grade)
Maximum Operating Speed80 m/s
Maximum RPM13,300 RPM typical for 115 mm discs – verify label
Compatible Machine115 mm angle grinder
Safety StandardEN 12413
Pack Quantity10 discs
Country of ManufactureIndia

115x6mm Grinding Disc

X Flex 115x6mm Grinding Disc — pack of 10.

115mm grinding discs for weld removal, deburring and edge preparation on mild steel and carbon steel.

Applications

  • Grinding welds and fabrication joints.
  • Removing burrs and sharp edges.
  • Preparing edges before welding.
  • Cleaning rust or scale from steel surfaces.

Size and Compatibility

  • Diameter: 115 mm
  • Thickness: 6.0 mm
  • Bore Size: 22.23 mm
  • Disc Type / Profile: Depressed Centre Grinding Disc
  • Compatible machine: 115 mm angle grinder
  • Pack quantity: 10 per pack

Check the product label and machine instructions for fitting, operating speed and safe use before starting work.

Browse the X Flex abrasive range for other sizes and workshop consumables.

Size

115mm

Reviews

There are no reviews yet.

Be the first to review “115x6mm (4.5”) Grinding Disc – 10 Pack”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required

SectionDetails
Ideal ApplicationsGrinding welds and fabrication joints.
Removing burrs and sharp edges.
Preparing edges before welding.
Cleaning rust or scale from steel surfaces.
Suitable MaterialsMild steel.
Carbon steel.
Structural steel.
General ferrous metals.
Recommended Machine115 mm angle grinder with correct guard fitted.
Best ForSmaller fabrication and maintenance jobs requiring controlled grinding.
Do Not Use ForCutting applications.
Excessive side loading beyond normal grinding use.
Stainless steel unless confirmed suitable by the product label.
Practical Workshop NoteUse the correct grinding angle and avoid digging the edge into the workpiece.

Grinding discs are intended for grinding operations such as weld removal, bevel preparation and heavy stock removal. They are not intended for thin cutting operations.

SectionDetails
Intended UseGrinding, weld removal, edge preparation, bevel grinding, cleaning and stock removal on suitable metal workpieces.
Compatible MachineAngle grinder matching the disc diameter, bore size and maximum speed marking.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForThin cutting, use on an incorrect grinder size, use without guard, use on materials not suitable for the disc, or grinding with a damaged disc.
  • Use the correct grinding angle and steady pressure.
  • Avoid jamming the disc into corners.
  • Keep the guard between the operator and the disc where possible.
  • Move smoothly to avoid gouging and overheating.
  • Stop if vibration or unusual noise occurs.
  • Applying excessive pressure.
  • Using a worn or uneven disc.
  • Grinding with the tool at an unsafe angle.
  • Removing the guard to reach tight spaces.
  • Using the wrong disc on stainless steel where contamination is a concern.

More from Grinding Discs

  • Sale! 115x3mm (4.5”) Type 42 Grinding Disc - 10 PackSale! Add to cart
    Grinding Discs

    115x3mm (4.5”) Type 42 Grinding Disc – 10 Pack

    Pack of 10 — Original price was: $21.50.Current price is: $18.50.
    ($1.85 each)
    Add to cart
  • Grinding Discs

    230x6mm (9”) Grinding Disc – 5 Pack

    Pack of 5 — $30.00
    ($6.00 each)
    Add to cart
  • Grinding Discs

    180x7mm (7”) Grinding Disc – 10 Pack

    Pack of 10 — $49.50
    ($4.95 each)
    Add to cart
  • Grinding Discs

    125x3mm (5”) Type 42 Grinding Disc – 10 Pack

    Pack of 10 — $24.00
    ($2.40 each)
    Add to cart

Frequently Asked Questions

What is this grinding disc used for?

115mm grinding discs for weld removal, deburring and edge preparation on mild steel and carbon steel.

Which machine and fitting should I check?

115 mm angle grinder. Match the product dimensions and fitting to your tool. Check the product label and machine instructions for the permitted operating speed and setup.

How many are supplied in a pack?

Pack of 10.

Shopping Cart