180×1.6mm (7”) Inox Cutting Disc – 25 Pack

Pack of 25 — $70.00
($2.80 each)

Thin 180mm inox cutting discs for steel pipe, angle, bar and fabrication components. For straight cutting only, never side grinding.

  • Diameter: 180 mm
  • Thickness: 1.6 mm
  • Bore Size: 22.23 mm
  • Pack quantity: 25 per pack
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeInox Cutting Disc
Disc Type / ProfileT41 Flat Cutting Disc
Diameter180 mm
Thickness1.6 mm
Bore Size22.23 mm
Abrasive / GradeAluminium Oxide bonded abrasive (verify label grade)
Maximum Operating Speed80 m/s
Maximum RPM8,500 RPM typical for 180 mm discs – verify label
Compatible Machine180 mm angle grinder
Safety StandardEN 12413
Pack Quantity25 discs
Country of ManufactureIndia

180×1.6mm Inox Cutting Disc

X Flex 180×1.6mm Inox Cutting Disc — pack of 25.

Thin 180mm inox cutting discs for steel pipe, angle, bar and fabrication components. For straight cutting only, never side grinding.

Applications

  • Cutting thicker mild steel sections.
  • Cutting steel pipe, angle, bar and fabrication components.

Size and Compatibility

  • Diameter: 180 mm
  • Thickness: 1.6 mm
  • Bore Size: 22.23 mm
  • Disc Type / Profile: T41 Flat Cutting Disc
  • Compatible machine: 180 mm angle grinder
  • Pack quantity: 25 per pack

Check the product label and machine instructions for fitting, operating speed and safe use before starting work.

Browse the X Flex abrasive range for other sizes and workshop consumables.

Technical Specifications

Diameter: 180mm, Thickness : 1.6mm, Bore : 22.23mm, Max RPM : 8,500, Material: Aluminium Oxide (A46UBF), Application: Ideal for Steel and Stainless Steel, Feature : Self sharpens for faster, consistent cut, Design : Hi – Cut – Extra Durable

Size

180mm

Reviews

There are no reviews yet.

Be the first to review “180×1.6mm (7”) Inox Cutting Disc – 25 Pack”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

SectionDetails
Ideal ApplicationsCutting thicker mild steel sections.
Cutting steel pipe, angle, bar and fabrication components.
General workshop cutting where durability is more important than a very thin kerf.
Suitable MaterialsMild steel.
Carbon steel.
General ferrous metal.
Steel pipe, bar and angle.
Recommended Machine180 mm angle grinder with correct guard fitted.
Best ForGeneral-purpose steel cutting where a stronger, thicker disc is preferred.
Do Not Use ForStainless steel unless the product label confirms suitability.
Side grinding or heavy side pressure.
Precision thin cutting where a 1.0 mm disc is more suitable.
Practical Workshop NoteUse steady pressure and avoid forcing the disc. A thicker cutting disc removes more material than a 1.0 mm disc.

Cutting discs are designed for straight cutting only. They must not be used for side grinding or heavy sideways pressure. Correct use helps reduce the risk of disc breakage, kickback and poor cutting control.

SectionDetails
Intended UseStraight cutting of steel, stainless steel, pipe, tube, sheet, angle, flat bar and structural sections where the disc type is suitable for the material.
Compatible MachineAngle grinder or cut-off machine matching the disc diameter and label requirements.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForSide grinding, twisting in the cut, curved cutting, excessive force, using damaged discs, or using without the correct guard.
  • Hold the grinder firmly with both hands where applicable.
  • Keep the disc straight in the cut and avoid twisting.
  • Let the disc do the cutting; do not force it.
  • Support the workpiece so the cut does not close and pinch the disc.
  • Allow the disc to stop completely before placing the tool down.
  • Using a cutting disc for grinding.
  • Overloading the disc to make the cut faster.
  • Cutting without supporting the workpiece.
  • Changing direction while the disc is in the cut.
  • Using a disc after it has been dropped or damaged.

More from Cutting Discs

  • Sale! X Flex 115×3 mm Type 41 cutting discSale! Add to cart
    Cutting Discs

    115x3mm (4.5”) Type 41 Cutting Disc – 10 Pack

    Pack of 10 — Original price was: $18.50.Current price is: $16.50.
    ($1.65 each)
    Add to cart
  • Sale! 125x1mm (5”) Inox Cutting Disc - 25 PackSale! Add to cart
    Cutting Discs

    125x1mm (5”) Inox Cutting Disc – 25 Pack

    Pack of 25 — Original price was: $37.50.Current price is: $31.25.
    ($1.25 each)
    Add to cart
  • Cutting Discs

    125x3mm (5”) Type 41 Cutting Disc – 10 Pack

    Pack of 10 — $21.00
    ($2.10 each)
    Add to cart
  • Sale! X Flex 115×1 mm Inox cutting discSale! Add to cart
    Cutting Discs

    115x1mm (4.5”) Inox Cutting Disc – 25 Pack

    Pack of 25 — Original price was: $33.75.Current price is: $25.00.
    ($1.00 each)
    Add to cart

Frequently Asked Questions

What is this inox cutting disc used for?

Thin 180mm inox cutting discs for steel pipe, angle, bar and fabrication components. For straight cutting only, never side grinding.

Which machine and fitting should I check?

180 mm angle grinder. Match the product dimensions and fitting to your tool. Check the product label and machine instructions for the permitted operating speed and setup.

How many are supplied in a pack?

Pack of 25.

Shopping Cart