Sale!

125x1mm (5”) Inox Cutting Disc – 25 Pack

Pack of 25 — Original price was: $37.50.Current price is: $31.25.
($1.25 each)

X Flex 125mm x 1mm inox cutting discs for cutting steel and stainless steel tube, sheet, pipe and light sections. The thin Type 41 profile helps reduce material loss when making straight cuts.

  • Pack of 25 discs
  • 125mm diameter × 1mm thickness × 22.23mm bore
  • For compatible 125mm (5-inch) angle grinders with the correct cutting guard
  • For cutting only; do not use for side grinding
Technical Specifications
SpecificationDetails
BrandX Flex
Product TypeInox Cutting Disc
Disc Type / ProfileT41 Flat Cutting Disc
Diameter125 mm
Thickness1.0 mm
Bore Size22.23 mm
Abrasive / GradeAluminium Oxide – A46UBF
Maximum Operating Speed80 m/s
Maximum RPM12,250 RPM
Compatible Machine125 mm Angle Grinder
Safety StandardEN 12413
Pack Quantity25 Discs
Country of ManufactureIndia

125mm x 1mm Inox Cutting Discs for Steel and Stainless Steel

X Flex 125mm inox cutting discs come in a pack of 25 for workshop and fabrication cutting tasks. Use them for stainless steel tube and sheet, mild steel pipe, angle, flat bar and light sections.

Thin Type 41 Cutting Profile

The flat Type 41 disc has a 1mm thickness for a narrow cut and reduced material loss. Each disc measures 125 x 1 x 22.23mm.

Angle Grinder Compatibility

Choose this size for a compatible 125mm (5-inch) angle grinder with the correct cutting guard and mounting system. Check the disc label and machine instructions before fitting. Use for straight cutting only, never side grinding.

Technical Specifications

Diameter : 125mm, Thickness : 1mm, Bore : 22.23mm, Max RPM : 12,250, Material : Aluminium Oxide (A46UBF), Application: Ideal for Steel and Stainless Steel, Feature : Self sharpens for faster, consistent cut, Design : Slim cut for low material loss

Size

125mm

Reviews

There are no reviews yet.

Be the first to review “125x1mm (5”) Inox Cutting Disc – 25 Pack”

Your email address will not be published. Required fields are marked *

Store in a dry, clean area away from moisture, impact, excessive heat and direct floor contact. Keep products in original packaging until required.

SectionDetails
Ideal ApplicationsCutting stainless steel tube, sheet and light sections.
Cutting mild steel, RHS, SHS, pipe, angle and flat bar.
General fabrication, mobile welding repairs and maintenance.
Cutting jobs where reduced burr and less material loss are preferred.
Suitable MaterialsStainless Steel (Inox).
Mild Steel and Carbon Steel.
Structural Light Sections.
Sheet Metal, Tube and Pipe.
Recommended Machine125 mm Angle Grinder with correct guard fitted
Best ForFabricators and boilermakers using 125 mm grinders for regular steel cutting.

Cutting discs are designed for straight cutting only. They must not be used for side grinding or heavy sideways pressure. Correct use helps reduce the risk of disc breakage, kickback and poor cutting control.

Intended UseStraight cutting of steel, stainless steel, pipe, tube, sheet, angle, flat bar and structural sections where the disc type is suitable for the material.
Compatible MachineAngle grinder or cut-off machine matching the disc diameter and label requirements.
Before UseInspect the product for cracks, distortion, missing label, moisture damage or other visible damage. Do not use damaged or questionable products.
Speed CheckConfirm that the machine speed does not exceed the maximum speed/RPM marked on the product label.
GuardingUse the correct machine guard where applicable. Never remove guards to fit a larger or incorrect abrasive product.
Never Use ForSide grinding, twisting in the cut, curved cutting, excessive force, using damaged discs, or using without the correct guard.
PPESafety glasses or face shield, hearing protection, gloves suitable for the task, protective clothing, safety footwear and respiratory protection where dust or fumes may be present.
  • Hold the grinder firmly with both hands where applicable.
  • Keep the disc straight in the cut and avoid twisting.
  • Let the disc do the cutting; do not force it.
  • Support the workpiece so the cut does not close and pinch the disc.
  • Allow the disc to stop completely before placing the tool down.
  • Using a cutting disc for grinding.
  • Overloading the disc to make the cut faster.
  • Cutting without supporting the workpiece.
  • Changing direction while the disc is in the cut.
  • Using a disc after it has been dropped or damaged.

More from Cutting Discs

  • Sale! X Flex 115×3 mm Type 41 cutting discSale! Add to cart
    Cutting Discs

    115x3mm (4.5”) Type 41 Cutting Disc – 10 Pack

    Pack of 10 — Original price was: $18.50.Current price is: $16.50.
    ($1.65 each)
    Add to cart
  • Sale! X Flex 115×1 mm Inox cutting discSale! Add to cart
    Cutting Discs

    115x1mm (4.5”) Inox Cutting Disc – 25 Pack

    Pack of 25 — Original price was: $33.75.Current price is: $25.00.
    ($1.00 each)
    Add to cart
  • Cutting Discs

    180×1.6mm (7”) Inox Cutting Disc – 25 Pack

    Pack of 25 — $70.00
    ($2.80 each)
    Add to cart
  • Cutting Discs

    125x3mm (5”) Type 41 Cutting Disc – 10 Pack

    Pack of 10 — $21.00
    ($2.10 each)
    Add to cart

Frequently Asked Questions

What materials can these 125mm inox cutting discs cut?

These discs are suitable for straight cutting of steel and stainless steel, including tube, sheet, pipe and light sections. Choose a disc that matches your material and machine.

Will these discs fit my 125mm angle grinder?

Each disc measures 125 x 1 x 22.23mm. Check that your 125mm angle grinder supports this size and bore, uses the correct cutting guard, and does not exceed the speed marked on the disc.

How many cutting discs are supplied in a pack?

Each pack contains 25 X Flex 125mm x 1mm inox cutting discs of the same size.

Shopping Cart